High-precision tensile testing machine can test rubber, plastic, foaming material, plastic, film, flexible packaging, pipe, textile, fiber, nanomaterial, polymer material, composite material, synthetic material, packaging belt, paper, wire and cable, optical fiber and cable, wire, cable, safety belt, safety belt, leather belt, footwear, tape, polymer, copper, spring steel, metal wire, stainless steel, casting, copper pipe, non-ferrous metal Tensile, compression, bending, tearing, 90 ° peeling, 180 ° peeling, shearing, adhesive force, pullout force, elongation and other tests shall be carried out on auto parts, alloy materials and other non-metallic and metallic materials.
Features of high-precision tensile testing machine:
1. The machine structure is made of aluminum extruded plate with high precision, low resistance, gapless double ball screw and guide column, which improves the load efficiency and structural rigidity;
2. The control system adopts Panasonic full-digital AC server to control the AC servo motor with high response frequency, ensuring that the transmission system has high efficiency, stable transmission, low noise, and speed accuracy can be controlled within ± 0.2%;
3. The microcomputer system uses a commercial computer as the main control machine, and cooperates with the company's fully open test software to complete all test parameter settings, working state control, data acquisition, analysis and processing, result display and printout.
The maintenance process of high-precision tensile testing machine includes:
1. The surface of the machine should be regularly wiped and kept clean
2. Please wipe the electroplating part with engine oil or anti-rust oil to prevent rust and keep it bright
3. The transmission screw and screw part shall be filled with lubricating grease every three months to ensure the sensitivity of transmission
4. The machine controller and the lower part are not allowed to get wet to prevent damage to the electronic components
5. All fixtures and joint fittings should be properly placed and wiped with anti-rust oil to prevent rusting.
The inspection and maintenance of components are also very important. After each test, check each component to see if there is any wear phenomenon, so as not to affect the accuracy of the tension test. Replace the components found to have problems in time, and add lubricating oil to protect these easily worn components. The fixture after each test shall be disassembled to inspect its appearance, and then sealed and stored if there is no obvious problem.
